Movic goods from Japan: reading can badge and acrylic stand listings

If you have a blind-box can badge, an acrylic stand or a rubber strap from an anime you love, there is a good chance the small print on the back says Movic (ムービック). A lot of overseas fans have never heard the name, because Movic goods usually reach the West through resellers rather than the brand itself. Here is a short field guide for anyone trying to buy them from Japan.

Movic vs Animate

People mix the two up. Animate is mainly a retailer: the shop chain and the big online mall. Movic is a merchandise maker and specialty retailer inside the same Animate Group. In short, Movic often plans and makes the goods, and Animate is one of the main places they are sold. That is why a Movic badge can turn up at an Animate store, at a pop-up cafe, at an event booth or on movic.jp itself.

What Movic actually makes

• Can badges (缶バッジ). The pin-back badges behind Japan's trading and itabag culture, usually sold as blind-box sets tied to one series.
• Acrylic stands and acrylic keychains. Flat printed figures on a base, cheap, durable and very collectible.
• Straps and charms. Rubber straps, metal charms and phone accessories.
• Apparel, stationery and daily goods. T-shirts, totes, clear files, stickers, mugs.
• Event and collab goods. Releases for premieres, conventions and pop-up cafes, often in short runs.

Because so much of this is made in limited runs, popular acrylic stands and collab badges can sell out within hours and then reappear on Mercari or Suruga-ya at a premium. That second-hand market is where most overseas buyers end up.

Reading a second-hand listing

Search the series name plus the product type in Japanese: 缶バッジ for badges, アクスタ or アクリルスタンド for acrylic stands, ラバーストラップ for rubber straps, and add ムービック if you only want Movic pieces. A few words that matter in the listing:

• 未開封 means unopened, so the blind bag is still sealed and you do not know which character is inside. 開封済み means opened, which is how you buy one specific character.
• ランダム or トレーディング means the item was originally sold blind. A "set" listing (セット or コンプ, complete) should state how many pieces are included.
• For acrylic stands, check whether the base and the protective film are mentioned. Missing bases are common on opened lots.

Buying new from movic.jp

Movic's own shop is built for the Japanese market: Japanese-only interface, a Japanese address in most cases, and no reliable worldwide shipping. A proxy can place the order for you, but goods sold only by lottery (抽選), with purchase limits, or requiring Japanese ID verification or a store membership can't be bought that way. Badges and stands are light, so the sensible move is to let several small orders arrive in Japan and ship them as one parcel. For US buyers, the $800 de minimis exemption no longer applies: since 29 August 2025, parcels of any value go through customs and pay applicable duties, taxes and fees.

Disclosure: this post comes from the OneMall team. OneMall is a Japan proxy-shopping and forwarding service, so the link below is commercial. It points to our longer Movic buying guide, with the Movic vs Animate breakdown, the comparison table and the buying steps. OneMall does not independently authenticate listings or guarantee product condition.

Which series do your Movic badges or stands come from?

How to plan an ita bag without buying the wrong size

How to plan an ita bag without buying the wrong size

An ita bag looks simple until the measurements start disagreeing. A seller may call one bag “A4,” another “L,” and a third “large,” while the part that actually matters—the usable clear window—is smaller than the outside of every bag. For anime-pin, acrylic-keychain, and nui-plush collectors, the safest way to shop is to design the display first and choose the bag second.

Start with the display window, not the bag label

A3 and A4 are useful size classes, but they do not equal exact window dimensions. Brand-specific labels such as S, L, and LL are even less portable between product lines. Record four measurements before ordering:

1. usable clear-window width and height;
2. removable insert width and height;
3. depth of the clear compartment;
4. zipper-opening width.

The last two are especially important for rosettes and plush. A window can look tall enough in a product photo while the opening is too narrow for the item to pass through safely.

Make a full-size paper layout

For can badges, measure the whole badge, including the rim. Divide the usable window width by the badge diameter plus the gap you want, round down, and repeat for the height. A nominal 300 x 210 mm area will not necessarily hold five 57 mm badges across after margins and spacing.

The quick reality check is a paper template. Draw the exact usable window, place the real badges or traced circles on it, and photograph the arrangement before attaching anything. Duplicate badges work well in a regular grid; mixed 44 mm, 57 mm, and 75 mm badges usually look cleaner when the largest piece is anchored first and smaller pieces fill the remaining space.

Match the insert to the collection

A removable mesh insert is convenient because collectors can build the layout flat, move pins without puncturing the bag lining, and transfer the finished display as one piece. A fabric-covered board gives a cleaner backdrop and can be cut to size, but permanent adhesive should stay away from valuable paper goods.

Some bags use reversible inserts or covers that hide the display. That can help during commuting, rain, or entry to places where a large character display is inconvenient. Whatever the insert style, test whether badge backs catch on the material and whether the finished board stays secured inside the pocket.

Secure different goods differently

Can badges benefit from reliable locking backs or back protectors. Acrylic keychains should use short chains or clear loops so they cannot swing into each other or scratch the PVC window. Acrylic-stand bases are better carried in a padded interior pocket. Cards and bromides should be sleeved first, with the sleeve mounted rather than the collectible. Plush mascots are safer with two attachment points, using the ball chain only as a secondary connection.

Avoid filling the pocket until it bows. Pressure can mark acrylic pieces and distort the clear panel. Heavy bottles, keys, and daily-use items should stay in a separate main compartment.

Used-bag checks that photos often hide

For a second-hand bag, inspect the window for yellowing, haze, creases, and a sticky surface. Check handle bases, strap anchors, zipper corners, bottom wear, and synthetic-leather peeling. Confirm that the insert, divider, shoulder strap, and decorative ribbons are included. Side-lit photos are more useful than a straight-on image for revealing cloudy PVC.

Japanese searches are easier with the terms 痛バッグ or the short form 痛バ. Add A4 or A3 for size, シート for inserts, 缶バッジ for can-badge layouts, ぬい for plush displays, 中古 for used bags, and 痛リュック for backpacks.

Remember the shipping box

Large structured bags can be light but bulky. International carriers may charge by the greater of actual weight or volumetric weight, and folding the bag to shrink the parcel can crease the window. Compare the cost of protective packing with the risk of compressing a display bag.

The full size table, pin-layout formula, Japanese search list, and used-condition checklist are collected in the OneMall ita bag size guide.

Disclosure: this post was adapted by the OneMall team from its own guide, so the link is a commercial source. OneMall is a Japan proxy-shopping and forwarding service. Service fees are ¥300 per item on most marketplaces and from ¥200 per item on Yahoo Auctions and LinkBuy. The first six orders consolidate free, and storage is free for 90 days after arrival (30 days after consolidation). OneMall does not independently authenticate listings or guarantee item condition.